I'm having a hard time messaging with a Keyence DL-EP1 using a MicroLogix 1100 PLC.
PLC is a 1763-L16BWA B/16.00.
I used the Molex Ethernet/IP Tools and confirmed that I can message the unit, but for some reason, the MicroLogix is MSG instruction is erroring out after the timeout with "Connection timed out by the network". I also monitored the channel status and all Ethernet/IP Replies are "Recieved with Error".
I've checked all my settings, got CIP Generic, Generic Get Attribute Single, Class 67, Instance 0, Attribute 90 (as per the manual) and also Mulihop is setup for the correct address of the Keyence.
I'm just stumpped, anyone come across something like this and/or have some ideas/suggestions?
Thanks in advance!
PLC is a 1763-L16BWA B/16.00.
I used the Molex Ethernet/IP Tools and confirmed that I can message the unit, but for some reason, the MicroLogix is MSG instruction is erroring out after the timeout with "Connection timed out by the network". I also monitored the channel status and all Ethernet/IP Replies are "Recieved with Error".
I've checked all my settings, got CIP Generic, Generic Get Attribute Single, Class 67, Instance 0, Attribute 90 (as per the manual) and also Mulihop is setup for the correct address of the Keyence.
I'm just stumpped, anyone come across something like this and/or have some ideas/suggestions?
Thanks in advance!