Andy6
Member
Hey guys,
I'm having some trouble getting my Micrologix 1200 setup with a 1762-IF2OF2 analog input/output card. I am trying to use it to read analog voltage (0-10) from a pressure transducer. I have the DIP switches set for voltage, as well as the card is set for voltage in RS500.
I checked the sensor, connected directly to a DMM, and it checks out fine. But when I have it connected to the PLC I read nothing across the terminals and get nothing but interferance in RS500. I believe I have it wired properly according to the manual.
I've tried everything I can think of and I'm all out of ideas. Can you guys think of anything I've overlooked?
I'm having some trouble getting my Micrologix 1200 setup with a 1762-IF2OF2 analog input/output card. I am trying to use it to read analog voltage (0-10) from a pressure transducer. I have the DIP switches set for voltage, as well as the card is set for voltage in RS500.
I checked the sensor, connected directly to a DMM, and it checks out fine. But when I have it connected to the PLC I read nothing across the terminals and get nothing but interferance in RS500. I believe I have it wired properly according to the manual.
I've tried everything I can think of and I'm all out of ideas. Can you guys think of anything I've overlooked?