Help! I have a micrologix 1200 L24BWAN I can connect with Rxlinx DF1 And I see the processor ML1200. When I go to Rslogix 500 to upload the program I get an Incompatible processor. The first thought was Version levels So I upgraded the software to
RsLinx is Ver 3.71
Rslogix 500 is Ver 9.5
I have an Identical New processor I just bought and can read and write to it no problem. But I have problem with this older PLC.
If I go to data monitor in RXlinx It says no data tables but it is running a machine.
Currently I have my cable plugged into the side port (second comm port) The Primary comm port is plugged into a PC that is running a VB6 program talking to the PLC. When I tried connecting to this port I could not get a successful connection in RSLinx.
RsLinx is Ver 3.71
Rslogix 500 is Ver 9.5
I have an Identical New processor I just bought and can read and write to it no problem. But I have problem with this older PLC.
If I go to data monitor in RXlinx It says no data tables but it is running a machine.
Currently I have my cable plugged into the side port (second comm port) The Primary comm port is plugged into a PC that is running a VB6 program talking to the PLC. When I tried connecting to this port I could not get a successful connection in RSLinx.