Micrologix 1200 on Devicenet

ouahib

Member
O
Join Date
May 2010
Location
MONTREAL
Posts
1
Hi Guys!
i have a 1761-DNI serial B connected through the RS232 to a MLX1200.
I was able to see with RSNETWORX the 1761-Dni and a 1794-ADN using a 1770-KFD.
I have with the 1794-ADN one discrete Output card and 1 Input discrete card.
I want to control the Outputs of this flex Output card through a program in the MLX1200,can you please help me or guide me to perform this?.
So the Master is the MLX1200 and the slave is the 1794-ADN.
Thank you for your help!
 

Similar Topics

C
Micrologix 1200 & PV600 on Devicenet
Hi friends!!! I need to see some floating values from a Micrologix 1200 in a PanelView 600. They are connected via Devicenet. The Micrologix has...
Replies
1
Views
4,492
TConnolly
TConnolly
U
How to communicate between Siemens S7-1200 and Allen-Bradley MicroLogix 1400?
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
Replies
8
Views
651
ulotrichous
U
R
MicroLogix 1200 Fault Reset
I have a MicroLogix 1200 that has an 8 input and a 16 output. Every 6 months-year I get a fault and when online go to error it is something like...
Replies
3
Views
507
roxusa
R
M
Micrologix 1200
Have a bad output on a Micrologix 1200. Moved wire over to an available output, changed program to associate with new output. downloaded program...
Replies
8
Views
754
I_Automation
I_Automation
N
micrologix 1200 analog output
I need help achieving the following task: ML1200 sending 4 to 20 mA thru analog output ch0 to a DC speed controller analog input(4 to 20 mA) my...
Replies
3
Views
671
parky
P
Back
Top Bottom