Micrologix - Conformal Coated

rmb550

Member
R
Join Date
Nov 2009
Location
Ontario
Posts
86
Are Micrologix components conformally coated or are they available coated as an option? I tried searching Rockwell's site, but came up with nothing.
 
I have several MicroLogix 1100 laying around here, that were ordered conformally coated, as well as modules for them. The coformal coating was an option, but made the lead time longer due to it.
 

Similar Topics

M
MICROLOGIX 1400 to Schneider PM800 Powermeter through rs485 no comm
hi to all, have anyone tried to communicate Schneider PM800 to a ML1400 through rs485? i am having an issue with it just receiving message...
Replies
1
Views
56
MiLo28
M
C
FactoryTalk View Studio - Updating from MicroLogix to CompactLogix
Hello, I have a panelview plus that reads from 4 different PLC's. 2 of these used to be Micrologix PLC's and someone else went and updated them to...
Replies
3
Views
133
Jmeadows7676
Jmeadows7676
andyvanosdol
Keyence SR-X300 to Micrologix 1400
Hey all, first time poster here. I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400. Keyence sent...
Replies
0
Views
120
andyvanosdol
andyvanosdol
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
147
jscampbell210
J
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
143
Chris3EC
C
Back
Top Bottom