Timk5000
Member
I am having an issue with a little Micrologix program.
Counter 1 increments each time item passes sensor on input 0
When Counter 1 increments to 5
Timer 1 starts
When Timer 1 is Done
Output 0 Turns on
Index belt advances until input 1 senses position change
Timer is Reset and everything starts over.
Problem is when the Timer 1 is reset it seems to start with a count of 1
I am not sure what I am doing wrong. In my sometimes confused mind it should work.
See Attached
Counter 1 increments each time item passes sensor on input 0
When Counter 1 increments to 5
Timer 1 starts
When Timer 1 is Done
Output 0 Turns on
Index belt advances until input 1 senses position change
Timer is Reset and everything starts over.
Problem is when the Timer 1 is reset it seems to start with a count of 1
I am not sure what I am doing wrong. In my sometimes confused mind it should work.
See Attached