micrologix Embedded I/O configuration ?

[Mattallen]

The current configuration of my micrologix 1500 embedded I/O has been configured as input I0:4 + I0:5 and I0:6 +I0:7 4ms I would like to know what I must do to change this. The help tab states "the input filter response times can only be adjusted at the time your program is developed" So does this mean I can edit the input filter and reload the program?

 

[sthompson]

The current configuration of my micrologix 1500 embedded I/O has been configured as input I0:4 + I0:5 and I0:6 +I0:7 4ms I would like to know what I must do to change this. The help tab states "the input filter response times can only be adjusted at the time your program is developed" So does this mean I can edit the input filter and reload the program?

Welcome to the Forum!

Yes, the 1500 doesn't support Online Programming. By the way, it should be I:0/2 and I:0/3 etc.

Stu....

 

[Mickey]

And just in-case you are not aware of where that's done. see picture below.