Dear Automation guys,
Im quite new to Rockwell. I have to do the migration of logic from PLC-5/40 to CLX L71 CPU.
So far:
- I have done exports as said in manual
- Migration tool finishes the job without errors
Butt:
When Studio 5000 import procedure is launched from migration tool. At the end I got the following Error in Line 1 in Studio 5000
Error: Line 1: Data type mismatch - the object's value does not match its data type.
There are first couple of lines of .L5K file:
IE_VER := 2.6;
CONTROLLER PP_GAS (
ProcessorType := 1756-L71,
Major := 24
)
TAG
O : INT[128] (Radix:=Binary,
Comment[19].0:="START/STOP$N170PA01A",
Comment[19].2:="START/STOP$N330HC11",
Im quite new to Rockwell. I have to do the migration of logic from PLC-5/40 to CLX L71 CPU.
So far:
- I have done exports as said in manual
- Migration tool finishes the job without errors
Butt:
When Studio 5000 import procedure is launched from migration tool. At the end I got the following Error in Line 1 in Studio 5000
Error: Line 1: Data type mismatch - the object's value does not match its data type.
There are first couple of lines of .L5K file:
IE_VER := 2.6;
CONTROLLER PP_GAS (
ProcessorType := 1756-L71,
Major := 24
)
TAG
O : INT[128] (Radix:=Binary,
Comment[19].0:="START/STOP$N170PA01A",
Comment[19].2:="START/STOP$N330HC11",