gbradley
Lifetime Supporting Member
I attached a .jpg of the printed ladder in question.
There is a Load, or Examine On instruction.
In between the vertical bars are the letters STL...---|STL|---
As I am entering in the instructions, I don't see an option to display ---|STL|---
How can I display this?
Or is the ---|STL|--- a completely different instruction, than ---| |---?
I entered it with a standard instruction, so I wonder if it will work the same.
------
All I have is a hard copy of a ladder file printed on paper.
I can't get to the processor right now, so I am writing a ladder file with GX developer.
I just ordered GX-Works2-C1 for the PLC and GT-Works3-C1 for the HMI.
In the meantime, I am practicing with the GX developer Programming and Maintenance tool version 8.25B
Thanks
There is a Load, or Examine On instruction.
In between the vertical bars are the letters STL...---|STL|---
As I am entering in the instructions, I don't see an option to display ---|STL|---
How can I display this?
Or is the ---|STL|--- a completely different instruction, than ---| |---?
I entered it with a standard instruction, so I wonder if it will work the same.
------
All I have is a hard copy of a ladder file printed on paper.
I can't get to the processor right now, so I am writing a ladder file with GX developer.
I just ordered GX-Works2-C1 for the PLC and GT-Works3-C1 for the HMI.
In the meantime, I am practicing with the GX developer Programming and Maintenance tool version 8.25B
Thanks