pajohnston
Member
Hi all
I have a mitsubishi servo with a j3 60a amp controlled by a pulse train from a fx3u plc
It has been functionong well for the last three months but im now getting creep.
Im sending 4000 pulses and the servo is moving between 4000 and 4005
Ive tried using a different pls output and it does'nt seem to make a difference
Any ideas
I have a mitsubishi servo with a j3 60a amp controlled by a pulse train from a fx3u plc
It has been functionong well for the last three months but im now getting creep.
Im sending 4000 pulses and the servo is moving between 4000 and 4005
Ive tried using a different pls output and it does'nt seem to make a difference
Any ideas