BillRobinson
Member
Modbus Adressing - Just Out of Curiosity
What is/was the 2xxxx series of modbus addressing used for?
What is/was the 2xxxx series of modbus addressing used for?
Modbus Adressing - Just Out of Curiosity
- Thread starter BillRobinson
- Start date
Here is a link to functions and types.
http://www.modbusdriver.com/doc/libmbusmaster/modbus.html
Here is a link to Wikepedia where ther are good explanations and links to all sorts of Modbus information.
http://rds.yahoo.com/_ylt=A0oGkkjeHINFQzwBLapXNyoA;_ylu=X3oDMTB2ZjQ4dDExBGNvbG8DdwRsA1dTMQRwb3MDMgRzZWMDc3IEdnRpZAM-/SIG=11n20sv1c/EXP=1166306910/**http%3a//en.wikipedia.org/wiki/Modbus
http://www.modbusdriver.com/doc/libmbusmaster/modbus.html
Here is a link to Wikepedia where ther are good explanations and links to all sorts of Modbus information.
http://rds.yahoo.com/_ylt=A0oGkkjeHINFQzwBLapXNyoA;_ylu=X3oDMTB2ZjQ4dDExBGNvbG8DdwRsA1dTMQRwb3MDMgRzZWMDc3IEdnRpZAM-/SIG=11n20sv1c/EXP=1166306910/**http%3a//en.wikipedia.org/wiki/Modbus
Similar Topics
I am trying to connect to a Chiller through Modbus TCP that has been setup as a Modbus slave and I see the Rockwell AOI and it looks pretty...
Hi!
We have a MicroLogix 1400 that is programmed to be readable to modbus tcp. This is working and I use for example adress 10001 to access coils...
Hello Everyone,
I am using a raC_Opr_NetModbusTCPClient AOI module, as below,.
So, I need some assistance to restrict in reducing the poling...
I want to communicate my Q series PLC with Factory IO using GX works 2 software, I want to use modbus as server and the ips are as follows
plc...
Hi folks,
I have a Controllogix in communication with a zigbee coordinator using Logix AIO for modbus tcp. This zigbee coordinator have 3 slaves...
