modbus card for A-B SLC 5/03

Hi Ran


I would talk with Contel&Unitronics first,I know there is away to communicate between Unitronics and AB (At least it was in old models).
If not I think basic card can do the job.
 
Hey Ran,

Ken's got the right answer. You can call me if you've got questions regarding the module. I'll send you my cell phone number
to your plcs.net address.

Good Luck,

(8{)} ( .)

(Yosi)
 

Similar Topics

I have a project to setup base programs across multiple PLC platforms that can be used for Modbus communications to various sensors that have...
Replies
0
Views
135
1) I am currently trying to integrate a Prosoft MVI56E-MCM Module into a 1756-L61 CONTROLLOGIX5561 that is a redundant system (CPU is redundant...
Replies
13
Views
3,452
Hello guys, I have to admit I'm still kind of a layman in this field but I'm trying hard to pick up some knowledge. I have a PLC FX1N with the...
Replies
5
Views
3,626
Hi everyone, Looking at a new project where I will need to read and write some data out to a external Batch Controller via Modbus TCP/IP. The PLC...
Replies
5
Views
3,506
Hi All, I have used prosoft MVI69E-MBS to communicate to modbus controllers. I was able to read parameters from the controllers but I have no...
Replies
0
Views
1,987
Back
Top Bottom