abcd Member A Join Date Mar 2012 Location Toronto Posts 1 Mar 11, 2012 #1 Is it possible to set up communication between Trident CM module and Bently Nevada System using Modbus TCP Protocol (Ethernet Port) to read data from Bently Nevada System.?
Is it possible to set up communication between Trident CM module and Bently Nevada System using Modbus TCP Protocol (Ethernet Port) to read data from Bently Nevada System.?
rootboy Lifetime Supporting Member Join Date Jan 2004 Location Tennessee Posts 1,375 Mar 13, 2012 #2 It looks like it will: From what I googled, the Trident supports Modbus Master or Slave TCP, and the Bentley does as well. http://forum.prosoft-technology.com/prosoft/support/bulletin_board/inrax/mvi156_mnet http://www.jameda.com/pdf/System 1软件.pdf
It looks like it will: From what I googled, the Trident supports Modbus Master or Slave TCP, and the Bentley does as well. http://forum.prosoft-technology.com/prosoft/support/bulletin_board/inrax/mvi156_mnet http://www.jameda.com/pdf/System 1软件.pdf