Dear all,
as far as my past experience this forum as help me alot
as indicated above the MCM 3150 SLC is been installed in site i have to use 20 DI(10 internal bit 10 coils) and 11 analogue iputs(physical inputs).
1.One port wiil be used as master as half of the above inputs are coming from slaves and that data is to be put on the slve port
2. 2d port is used as slave and the from the master port(which is getting from 2 slave)+ data from digital module is to be make avilable at this port so that other master can read data
please help me in the step by step procedure to set up this communication
hoping for the best
thanks in advance
as far as my past experience this forum as help me alot
as indicated above the MCM 3150 SLC is been installed in site i have to use 20 DI(10 internal bit 10 coils) and 11 analogue iputs(physical inputs).
1.One port wiil be used as master as half of the above inputs are coming from slaves and that data is to be put on the slve port
2. 2d port is used as slave and the from the master port(which is getting from 2 slave)+ data from digital module is to be make avilable at this port so that other master can read data
please help me in the step by step procedure to set up this communication
hoping for the best
thanks in advance