Modbus TCP/IP in Cimplicity

[puravdagli]

Hi All,

This is my first experience with Modbus TCP. I need to read data from 2 Ashland ORP panels (I dont think the type of device really matters) into Cimplicity v6.2.

I know Cimplicity has a built in Modbus TCP driver but I have heard people having doubts about its robustness and reliability. Also, I am not aware of the amount of configuration involved. The other option I have is the Kepware Modbus TCP driver. Again, I do not have enough information about this to make an educated comparison. Please suggest.

Any help is appreciated.

Thank you.

 

[jdbrandt]

You don't mention your target processor, but, the PACSystems controllers have Modbus TCP channels as standard.

Refer to G.E. GFK-2224D, Chapter 7.