buffalonymann
Member
Have a machine with 2 compact 984 processors and am trying to develop the code allowing processor 1 to read a bit from processor 2
Modicon Compact 984
- Thread starter buffalonymann
- Start date
http://50.244.15.10/techlib/Modicon/Modicon%20Compact%20PLC%20Manual.pdf
You are look for Modbus communication from one controller (master) to the second (slave).
The above manual should get you started.
Regards,
Garry
You are look for Modbus communication from one controller (master) to the second (slave).
The above manual should get you started.
Regards,
Garry
Similar Topics
I recently acquired a client that has a lot of old Modicon 984 compact plc's. I have just ordered a rebuit A984-131 and want to know if I can...
I have little experience and no training on modicon. I am able to connect a laptop via proworx32 and serial cable, and load a project. My dilema...
Yesterday one of the process engineers went to site and removed the battery from the PLC. Which appears to have wiped the program. It's from 1999...
Hi guys,
I hope somebody on the Forum can help me out with a Modicon program printout.
I have a Proworx Plus format program file set from a...
Hi,
I'm trying to transfer a program to this PLC, but I'm getting an error message: "not logged in or a user is logged in on another port". It's...