Hey, i'm getting an error when i try to upload a program from a modicon M258 TM258LF42DT using eithernet. i tried using both SoMachine V4.1 and EcoStruxure V2.2 qnd i get the sqme error when i attempt an upload. you can see the error message on the pic i attached here, i think it's related to CodeSys or directory of logic builder files.
if you have any idea why i'm getting this error please let me know.
also i'm only trying to upload the program to go online so i can make the plc go into run mode (it's going to stop mode after startup for some reason, so if there is anyway i can make the plc go into run mode without having to upload the program that would help too.
thank you.
if you have any idea why i'm getting this error please let me know.
also i'm only trying to upload the program to go online so i can make the plc go into run mode (it's going to stop mode after startup for some reason, so if there is anyway i can make the plc go into run mode without having to upload the program that would help too.
thank you.