Ones_Zeros
Member
Hello
I was needing help with the proper scaling on a Modicon TSX Quantum- AVI030-00 8 Channel Analog Input PLC card.
What would be the proper RAW scaling on the 4-20mA signal on the card.
I'm having an issue with getting the value scaled properly.
I have tried 0-4095, but doesn't get the scaled value correct.
When i use 0-64000 it gets the scaled value correct, but the value runs off after a few days.
I have the Eng scaling 0-20
Here is some pics of the scaling blocks
I appreciate the help
I was needing help with the proper scaling on a Modicon TSX Quantum- AVI030-00 8 Channel Analog Input PLC card.
What would be the proper RAW scaling on the 4-20mA signal on the card.
I'm having an issue with getting the value scaled properly.
I have tried 0-4095, but doesn't get the scaled value correct.
When i use 0-64000 it gets the scaled value correct, but the value runs off after a few days.
I have the Eng scaling 0-20
Here is some pics of the scaling blocks
I appreciate the help