Hello!
I am somewhat familiar with the Moeller PS4 series. It was fun for it's day; however, I am seeing a series of LED lights I don't quite understand on a PS4-141-MM1.
1 (READY) Yellow
2 (RUN) Yellow
3 (NOT READY)Flashing Red
4 (BATTERY) Off
To me, it should either be Ready or not ready, not both... and not flashing red.
This screams hardware issue to me but I am not too sure. I've seen hardware issues show up on the LED status lights but never with a run and ready light at the same time.
This is a 'remote troubleshooting' situation for a friend of the family so I'm not able to get the unit in hand and I would hate to get them to remove it if it's a simpler solution than turning the switch to HALT, press the RESET button, switch to RUN or RUN M-RESET, press the RESET button.
Thank you
I am somewhat familiar with the Moeller PS4 series. It was fun for it's day; however, I am seeing a series of LED lights I don't quite understand on a PS4-141-MM1.
1 (READY) Yellow
2 (RUN) Yellow
3 (NOT READY)Flashing Red
4 (BATTERY) Off
To me, it should either be Ready or not ready, not both... and not flashing red.
This screams hardware issue to me but I am not too sure. I've seen hardware issues show up on the LED status lights but never with a run and ready light at the same time.
This is a 'remote troubleshooting' situation for a friend of the family so I'm not able to get the unit in hand and I would hate to get them to remove it if it's a simpler solution than turning the switch to HALT, press the RESET button, switch to RUN or RUN M-RESET, press the RESET button.
Thank you