Hello All,
I just finished programming some solenoid valves. I have to now program some Motor Operated Valves. The Controllogix PLC has 2 120VAC digital outputs going to the valve, 1 to OPEN and 1 to CLOSE the valve.
When programming these motor valves do I need to take anything special into consideration or can I just program them like solenoid valves (by the way for the solenoid valves I had only one output to control them).
Please let me know what factors I need to keep in mind to make sure that the valve has been opened and closed properly.
Look forward to your suggestions.
Thanks.
I just finished programming some solenoid valves. I have to now program some Motor Operated Valves. The Controllogix PLC has 2 120VAC digital outputs going to the valve, 1 to OPEN and 1 to CLOSE the valve.
When programming these motor valves do I need to take anything special into consideration or can I just program them like solenoid valves (by the way for the solenoid valves I had only one output to control them).
Please let me know what factors I need to keep in mind to make sure that the valve has been opened and closed properly.
Look forward to your suggestions.
Thanks.