Motorola Moscad with Siemens S7-200

coa

Member
C
Join Date
Jun 2004
Posts
96
Hi,

I'm testing communication between Motorola Moscad (Modbus master) and S7-200 (Modbus slave) with modbus communication but still no success. I've checked that S7-200 can be modbus slave by using Modbus simulation software connect to S7-200.
Does anybody have experience connect Moscad and S7-200 ? I may need to have modbus driver for Moscad but right now I don't have it and need to know the procedure for Moscad setup.
 

Similar Topics

K
Motorola MOSCAD 300 Modbus HELP!!!
I was updating my FIU (Master?) to try and improve radio communications. But I also ended up deleting the Modbus configuration on Port 2, so my...
Replies
1
Views
1,467
KristienP
K
N
Motorola MOSCAD
Hi..anyone can help how this MOSCAD heartbeat works?..thanks
Replies
1
Views
1,619
Webhead
Webhead
H
Motorola MOSCAD RTU expansion
Hello guys, I'm working on a water reservoir job and the client wants to extend the existing PLC configuration so he can monitor additional...
Replies
2
Views
2,078
Kevbo
K
A
Motorola Moscad
I got my hands on an old motorola Moscad. I can connect to it, but I don't have the password so it won't let me read the hardware, or view the...
Replies
1
Views
2,789
Webhead
Webhead
bluenoser337
Motorola MOSCAD ACE3600 Data Retention
I'm a newbie with the Motorola ACE3600 and have an issue with data retention. These RTUs have a battery backup but if the AC is down long enough...
Replies
14
Views
6,428
bluenoser337
bluenoser337
Back
Top Bottom