I am attempting to communicate between Red Lion G310 and a MDX61B SEW drive on RS-485. I have NOT been able to properly introduce them to each other as of yet!! The Red Lion has the SEW driver, however I have something
not right. According to SEW the only difference between the MDX60 and
MDX61 is more parameters.
Wiring:
G3 Pin1 to Drive terminal X13:10 rs-485+
G3 Pin2 to Drive terminal X13:11 rs-485 -
G3 Pin6 to Drive terminal X13:9 common
Baud 9600
parity even
stop bits one
data bits eight
Drop is 1 on link
I have been working on this for 2 days now and ????
not right. According to SEW the only difference between the MDX60 and
MDX61 is more parameters.
Wiring:
G3 Pin1 to Drive terminal X13:10 rs-485+
G3 Pin2 to Drive terminal X13:11 rs-485 -
G3 Pin6 to Drive terminal X13:9 common
Baud 9600
parity even
stop bits one
data bits eight
Drop is 1 on link
I have been working on this for 2 days now and ????