Hello all, I have recently started my first industrial electrician job in a mill a lot of its employees. There are no contractors brought in for any new projects to be done or new machinery that needs to be automated and installed. This provides a get learning experience right from initial assembly and program writing, to preventative maintenance and repair. Over the next few months I would like to help to increase the productivity and response time so that we can lower the overall down time. What I would like to do is to set up a program that works with all the other programs we have running. There are many outputs in our programs that are simply alarm conditions and when met send alarm signals to various panel views for the operators in those certain areas. I would like to take certain alarms from programs that when met send an alarm display to a virtual panel view program to start up and run on our shop computer (as we don't have any extra panel views laying around) so that we have a better idea of the problem and what we might need to bring with us before heading to the other side of the mill. We are running rslogix 5 and have a couple different panel view programs, panelbuilder 1400e and factory talk. This is the part I am not to sure about is how to set up the monitor/display program any help or any links would be greatly appreciated thank you for any wisdom you may have for me.