Brian_Nelson
Member
Can anyone tell me if it is possible to use Factory Talkview ME programming software with a new Panelview Plus HMI to read tags from multiple SLC 5/05 plc's?
I want to use a new Panelview Plus 6 or 7 to control multiple PLC's. All the PLC's have RSLogix 500 software.
Any comments or suggestions will be greatly appreciated. Thank you in advance!
I want to use a new Panelview Plus 6 or 7 to control multiple PLC's. All the PLC's have RSLogix 500 software.
Any comments or suggestions will be greatly appreciated. Thank you in advance!