Need a 24VDC DIN power supply...

[jdmartin8]

I hope it's ok to post this.... Just wondered if anyone has a spare 24VDC, at least .75amp, DIN mounted power supply that they would be willing to sell?

I need a supply for the PLC trainer that I am building up.

Thank you, and Happy Holidays !!

Jim

 

[Rod]

Why not use a wall plug brick supply?
Unless you need filtered and regulated - that is what I use

Even then you can shove it through an LM7824 for regulation

Rod (The CNC dude)

 

[rsdoran]

Take a look here: http://www.patchn.com/forum1/viewtopic.php?t=363

Not all is listed but I dont think there are any DIN mount DC supplies but there are 24vdc supplies.

 

[CaseyK]

24 volt DIN supplies are reasonably priced from Entertron and Automation Direct, both are listed in the "Learn PLC's" button under manufacturers links, or on a google search.

regards.....casey

 

[elevmike]

http://www.automationdirect.com/adc...Products/DC_Power_Supplies/Open-frame/FA-24PS

 

[Thomas Sullens]

p supply

These people have some $15.00 1 amp supplies
http://www.optimate.com

utoh

 

[testsubject]

You can also get some inexpensive PS if you can give up the DIN

http://www.astrodyne.com

 

[Del Monte]

I could not find power supplies at optimate.

The ones at Entertron and Automation Direct look good to me.

Del

 

[Mickey]

Try here

http://www.mcmaster.com/