need help for recipe Panelview C600

saurabh90

Member
S
Join Date
Jul 2014
Location
pune
Posts
2
hello frnds,
I need some help on how to write a recipe in Panelview C600 HMI, using Panelview explorer.The recipe has five parameters like Ring Diammeter,No of weld spots,spots over periphery,rotations with Steel and rotations with Graphite.The user will select recipe ex no1, will enter all parameters and press save.THe values should be written to five registers in PLC( Mcrologix 1400).
Will be happy to Have any suggestion.
 

Similar Topics

T
AB ML1500: Need help saving recipe
I'm trying to save the recipe file from the plc to the PC, I have tried saving while online but I don't see it when I'm offline. The recipes are...
Replies
3
Views
2,050
jimbo3123
J
A
need help
I was wondering if anyone could help i am trying to use a SLC 500 with a 5/05 processor to set up an incremental encoder to a HSCE2 card? The card...
Replies
1
Views
96
Ken Roach
Ken Roach
T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
150
TheCaptain2000
T
K
Need Help Modifying Citect Scada Historical Trend Variable Data
So i've been at this for a long while, i have Citect Scada 2018, i have full access to everything but i can't seem to find any option or...
Replies
0
Views
102
kreamsippycup
K
D
I need help to make a Working Schedule for Make-up Air unit
I'm fairly new to Rockwell software, I've had some basic training in the past but nothing too advanced. My company and I use Reliable products for...
Replies
11
Views
404
drbitboy
drbitboy
Back
Top Bottom