I’m not good in English. I would like to start to have your expertise . The study that I carried out relates to my training course in automation but I would like to also make with your help a good programmation with Rslogix 5000. My goal first was to design a ramp generator like show on the figure (fig 1) software with Rslogix5000 of controllogix.
I already made an program , but my supervisor told me that , my realization don’t really solve the problem, cause I generate the ramp with one order, he want me to generate a ramp twice:
First order: generate a ramp like show in a figure and wait second order
Second order: generate a ramp until the end.
Now my generations only do the first order, I don’t know how to continue program with restrictions.
I would like to sent a first order(start) to start generate the slopes(ramp), and as long as I would not have sent the second order for the stop the rampe_1 will be always with the maximum position, and once the second order (stop) sent,il will have there a second generation of slope up to value 0 .
And also want to change the slope of the ramp by programmation ,or not by parameters.(par example multiplication factor)
Please sent me your email and i will sent you a figure represent it and program i begin.
Thanks a lot
my email adress: [email protected]
I already made an program , but my supervisor told me that , my realization don’t really solve the problem, cause I generate the ramp with one order, he want me to generate a ramp twice:
First order: generate a ramp like show in a figure and wait second order
Second order: generate a ramp until the end.
Now my generations only do the first order, I don’t know how to continue program with restrictions.
I would like to sent a first order(start) to start generate the slopes(ramp), and as long as I would not have sent the second order for the stop the rampe_1 will be always with the maximum position, and once the second order (stop) sent,il will have there a second generation of slope up to value 0 .
And also want to change the slope of the ramp by programmation ,or not by parameters.(par example multiplication factor)
Please sent me your email and i will sent you a figure represent it and program i begin.
Thanks a lot
my email adress: [email protected]