We have DH+ network on 6 PLC5.
We have RSView32 as a HMI.
Previously we link HMI with DH+ network by 1784-KT card but we have a problem on some node drop from time to time without any error.
So, we try to use Gateway Rack on controllogix platform by combination between 1756-DHRIO and 1756-ENBT.
This config is work. We can link RSView32 through gateway rack to DH+ network.
The one problem is response time. When we change setpoint in HMI, It is very slow (about 30 seconds) before we can see feedback in HMI.
Please advise.
We have RSView32 as a HMI.
Previously we link HMI with DH+ network by 1784-KT card but we have a problem on some node drop from time to time without any error.
So, we try to use Gateway Rack on controllogix platform by combination between 1756-DHRIO and 1756-ENBT.
This config is work. We can link RSView32 through gateway rack to DH+ network.
The one problem is response time. When we change setpoint in HMI, It is very slow (about 30 seconds) before we can see feedback in HMI.
Please advise.
Last edited: