New project master Drive + S7 315-2dp cpu on profibus

zolti103

Member
Z
Join Date
May 2009
Location
Karachi
Posts
2
Hi,
i wants to write PLC program , to control and communicate CPU 315-2dp with master drive over profibus communication, i have all the hardware parts of the project, but i m confused how to start the programing specially of communication section, i have desgined programs of PLC but all with out Profibus, please tell me how to program for communication section of the project, i have complete software suits of Siemens

regards with anticipation
 

Similar Topics

Werner
s7 project retrieve error (micromaster/starter)
Hi there, When I retrieve my project (step 7 siemens) I get the following error message: "The retrieved data has been stored in directory...
Replies
10
Views
8,647
uptown47
U
N
Pro-Face PS5000 Project Receive Issue
Hello all, I am currently facing a problem with a Pro-Face HMI PS5000 project file download. I have tried using GP-ProEX SP1 (4.09.350) and...
Replies
0
Views
55
NicoSz
N
S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
6
Views
138
swedeleaner
S
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
10
Views
321
bkottaras
B
R
TIA portal, problem upgrade project to newer version
Hi, I have had problem with upgrading some projects from v16 to v18. I tried it on 3 diffrent computers. I want to post this so that anyone that...
Replies
3
Views
231
rQx
R
Back
Top Bottom