Old Bendix 5M problem

Dave Brown

Member
D
Join Date
Jan 2004
Location
Niles ,Michigan
Posts
2
I was wondering if anyone had Bendix 5M expierance. I turned it on this morning and I have a low DC fault as well as RTC Fault ( Real time clock ) This is a 1982 model used for controlling an American Eagle CNC Lathe as a result I have lost the ladder stored in memory and I cant reload from mylar tape untill fix the RTC fault. The problem is that without the opperating system none of the diagnostic functione are working.

Any help would be greatly appreciated
Dave
 

Similar Topics

T
Anyone here work for Johnson Controls now or in the past?...need help with OLD PLC program
I have an old Sentry Palletizer (S/O Number 3007 / Serial Number 1172) that has lost its program as the backup battery died years ago. I can...
Replies
0
Views
105
TheCaptain2000
T
C
Explorer rendering glitch in old FactoryTalk View ME
This is admittedly a pretty obscure problem, but maybe someone else has run into it, or at least something similar. For reasons I won't get into...
Replies
3
Views
146
Operaghost
Operaghost
L
Resetting old RSLINX Master Disk floppy
Does Rockwell still offer reset codes for old school Master Disk floppy's? In a bind and need to reset the activation disk soon and to be pointed...
Replies
9
Views
255
LMDAVE
L
C
Update old Parker TS80xx HMIs to use Crimson programs?
Has anyone found a way to convert/replace/update the firmware on old Parker TS80xx series HMIs (i.e. TS8010, TS8006, etc) to accept Crimson...
Replies
0
Views
105
CageFreeBMW
C
T
Powerflex 525 has a frequency of 2-2.50Hz when being told to stop
Hey all, I am currently working on a depalletizer for a customer and we are doing a hoist upgrade. This is a SLC500 processor and the drives are...
Replies
6
Views
320
Tbone1465
T
Back
Top Bottom