omron c120

You should be able to use LSS which is DOS based or Syswin which is Windows based. Keep in mind that you will need the LK201 Host Link unit.
 
There are previous threads on this. If you do a forum search with keywords for my user name and omron your likely to find out what you need.
 
It depends on how much you need to do. If it is simple stuff and not much of it, LSS is OK. If you have to do a fair bit I would definately suggest Syswin.

The host link you will require is a 3G2A6-LK201E. You can ofetn find these on E-bay.
 

Similar Topics

T
Omron C120 I/O-addresses?
Hi! I have a Omron C120-SC024-V1 with IM213 (unit 0) and OC222 (unit 1). I use Syswin and it works fine. My question is what addresses IM213 (16...
Replies
1
Views
1,455
aslan
aslan
M
Omron c120
WE HAVE A OMRON C120 PLC THAT WAS ON A MACHINE IN OUR MEXICO FACILITY THAT LOST ITS PROGRAM AND THE BATTERY WAS DEAD. THEY SENT ME THE PLC BACK TO...
Replies
1
Views
1,593
mpblanton
M
P
Omron C120 PLC
Gents, I am needing to upload the plc program from an Omron C120 plc. It appears that there is a large pin connector in the front of the plc for...
Replies
5
Views
3,020
Paulus
P
P
Omron C120 Series Interface
Gentlemen, I need to gain access to the logic in an old (Late 80's vintage) Omron Sysmac C120 PLC. My Local Omron rep is willing to loan me a copy...
Replies
3
Views
3,941
BobB
BobB
M
Omron C120
I have 6 ancient Omron C120 PLC's. We have NEVER had to change anything in them in the 16 years of there service. We now need to communicate with...
Replies
13
Views
3,685
BobB
BobB
Back
Top Bottom