Omron C120 I/O-addresses?

The_Harlequin

Member
T
Join Date
Feb 2011
Location
Europe
Posts
30
Hi!

I have a Omron C120-SC024-V1 with IM213 (unit 0) and OC222 (unit 1). I use Syswin and it works fine. My question is what addresses IM213 (16 inputs) and OC222 (24 outputs) has? I have tested 0.00 -> 60.00 but all that is wrong.

Thanks in advance
 

Similar Topics

M
Omron c120
WE HAVE A OMRON C120 PLC THAT WAS ON A MACHINE IN OUR MEXICO FACILITY THAT LOST ITS PROGRAM AND THE BATTERY WAS DEAD. THEY SENT ME THE PLC BACK TO...
Replies
1
Views
1,593
mpblanton
M
P
Omron C120 PLC
Gents, I am needing to upload the plc program from an Omron C120 plc. It appears that there is a large pin connector in the front of the plc for...
Replies
5
Views
3,020
Paulus
P
P
Omron C120 Series Interface
Gentlemen, I need to gain access to the logic in an old (Late 80's vintage) Omron Sysmac C120 PLC. My Local Omron rep is willing to loan me a copy...
Replies
3
Views
3,940
BobB
BobB
J
omron c120
Hi I have an omron c120 controller does any know if there is software available or am I stuck with the hand held?
Replies
3
Views
2,658
BobB
BobB
M
Omron C120
I have 6 ancient Omron C120 PLC's. We have NEVER had to change anything in them in the 16 years of there service. We now need to communicate with...
Replies
13
Views
3,685
BobB
BobB
Back
Top Bottom