Hello everyone,
I have a system that I believe consists of :
-CS1H-CPU66H with Io modules connected to it.
- Two C200H-RT201 with a bunch of ID212 and OC226N I/O modules connected to them
I uploaded the program off the CS1H and it looks like it had a program running only part of the equipment which means that the other two C200H controllers must have the other parts of the program running the rest of the equipment. But I couldn't find a port on the unit where I can plug a programming cable. The only door I found o the unit has a set of dip switches and no port (see picture).
So, what's a C200H-RT201?
Thanks
Kal
I have a system that I believe consists of :
-CS1H-CPU66H with Io modules connected to it.
- Two C200H-RT201 with a bunch of ID212 and OC226N I/O modules connected to them
I uploaded the program off the CS1H and it looks like it had a program running only part of the equipment which means that the other two C200H controllers must have the other parts of the program running the rest of the equipment. But I couldn't find a port on the unit where I can plug a programming cable. The only door I found o the unit has a set of dip switches and no port (see picture).
So, what's a C200H-RT201?
Thanks
Kal