Marsupilami
Member
- Join Date
- Jul 2004
- Posts
- 124
Hello,
I have an old C40H PLC here from omron and have found the correct programming software Syswin 3.4.
i can communicate with the PLC and even make a small program work, but now i am trying to set the clock trough the menu in syswin. "Online" "Set clock". then syswin displays PLC: "No clock or bad clock"!
there doesnt seems a way to get around this message. The specifications of the PLC say that there is an on board clock. and if i monitor the special registers i can see a timing value that increases per second.
If i modify the special registers i don't seem to be able to change te clock.
Does anyone have an idea how i should change the clock of this PLC?
regards
Marsupilami
I have an old C40H PLC here from omron and have found the correct programming software Syswin 3.4.
i can communicate with the PLC and even make a small program work, but now i am trying to set the clock trough the menu in syswin. "Online" "Set clock". then syswin displays PLC: "No clock or bad clock"!
there doesnt seems a way to get around this message. The specifications of the PLC say that there is an on board clock. and if i monitor the special registers i can see a timing value that increases per second.
If i modify the special registers i don't seem to be able to change te clock.
Does anyone have an idea how i should change the clock of this PLC?
regards
Marsupilami