I am trying to connect to a C60 K Omron PLC to upload the program.
I have:
- Host Link 3G2C7-LK201-EV1
- RS232 Cable to connect to the Host Link to my serial port
(COM 1)
- SYSWIN 3.2
I tried every baud setting I could and I still cant upload. There were a few postings a few years ago about this problem but nothing conclusive.
I have:
- Host Link 3G2C7-LK201-EV1
- RS232 Cable to connect to the Host Link to my serial port
(COM 1)
- SYSWIN 3.2
I tried every baud setting I could and I still cant upload. There were a few postings a few years ago about this problem but nothing conclusive.