Omron CompoWay/F

betamax6

Member
B
Join Date
Oct 2006
Location
manila
Posts
21
Good day!
Can anyone explain what is the Omron CompoWay/F protocol? Is it used by all omron PLCs including the CPM2A micro plc? I am thinking of acquiring measurement data from an omron smart sensor ZX-L-N (laser displacement sensor) through serial communication instead of using analog module, but the specs say that it uses compoway/f protocol. Help please...thanks...
 

Similar Topics

S
Codesys FB for Omron Compoway/F communication
Hi, I have an existing system with a Rexroth PPC that only has a serial port over which 4-5 Omron temperature controlers are getting their...
Replies
1
Views
3,529
shooter
S
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
66
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
192
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
77
IO_Rack
IO_Rack
J
Omron CJ2m cpu33 - reading codes
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
132
chelton
C
Back
Top Bottom