tehkimsoon
Member
i am newbie for omron plc cpm2a. how writing flow totalizer for ai 4-20ma ? and how calculation ? please help me.....thks....
omron cpm 2a how writing flow totalizer for AI 4-20ma
- Thread starter tehkimsoon
- Start date
Similar Topics
Dear All,
I am Using Omron CPM 2A PLC in a Application.
This controller has 2 ports
a) Pheripheral Port and
b) RS 232 Port.
Pro Face HMI...
Greetings:
I have a copy of Syswin 3.4 and I am I want to reprogram my Omron CPM1A. I can figure out the connections easily enough. I want to...
- Anthony30
- LIVE PLC Questions And Answers
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Hi all,
i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info.
my unit has an ip address of...