unsaint32 Member U Join Date Oct 2012 Location minneapolis Posts 365 Dec 10, 2013 #1 The manual says it take either 120V or 24VDC. I hooked it up to 24VDC, and the front screen keeps blinking no matter what buttons I press and no matter how longere I press. What am I not doing? Thanks.
The manual says it take either 120V or 24VDC. I hooked it up to 24VDC, and the front screen keeps blinking no matter what buttons I press and no matter how longere I press. What am I not doing? Thanks.
iant Lifetime Supporting Member + Moderator Join Date May 2002 Location Melbourne Posts 3,691 Dec 10, 2013 #2 is the thermocouple connected - you will need to RTFM as thats what I would need to do
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Dec 10, 2013 #3 There are different units for AC and DC power. If you can post the complete part number from the sticker on the side of the unit, I can verify the correct power supply. Hope this will help.
There are different units for AC and DC power. If you can post the complete part number from the sticker on the side of the unit, I can verify the correct power supply. Hope this will help.
unsaint32 Member OP U Join Date Oct 2012 Location minneapolis Posts 365 Dec 10, 2013 #4 gtsuport said: There are different units for AC and DC power. If you can post the complete part number from the sticker on the side of the unit, I can verify the correct power supply. Hope this will help. Click to expand... Omron E5CN-R2MT-500 Thanks gtsuport
gtsuport said: There are different units for AC and DC power. If you can post the complete part number from the sticker on the side of the unit, I can verify the correct power supply. Hope this will help. Click to expand... Omron E5CN-R2MT-500 Thanks gtsuport
Highland Controls Member H Join Date Oct 2012 Location Richfield, Ohio Posts 465 Dec 10, 2013 #6 Yep, you have the 100-240VAC version.
gtsuport Member G Join Date Feb 2005 Location Grand Rapids, MI Posts 1,322 Dec 11, 2013 #7 I agree with the previous two posts. A 24 volt unit would have a "D" after the "MT".