OMRON induction motor

[faycal86]

I am using OMRON CJ1M CPU 11 PLC with CJ1W MAD42 Analog I/O Unit
to control speed of an induction motor using a PID controller in a closed loop .
so I will use 1input(to plc ) to read the speed and 1 output (to motor) as setpoint value.
I need memory areas and range code to specify the range of the voltage
thanks

 

[gtsuport]

You need to download the W345 manual.

It will give you all the information you are looking for.

Hope this will help.