Omron Motion PLC software?

madams74

Guest
M
I am using a CV500-MC421 Motion card. The MCSS software is what we were using to control the MC program. It is G-code based. The harddrive went bad and since it all came from Japan we have no other copy of MCSS. It is a DOS based program. Can anyone attach me a copy to my e-mail? No one seems to have anymore in my neck of the woods.

[email protected]
 
Unless you are lucky and someone else can help, you will probably have to repost when Jay Anthony returns from holidays. He is due back on July 25. He may be able to help you.
Please join the forum.
beerchug
 

Similar Topics

leem2209
Omron motion controller MCW151-DRT
Haha... Omron auto changes to Moron on autocorrect! 😝 Anyway... I'm having issues with some Motion Controller cards. Long story short, we had...
Replies
2
Views
2,809
leem2209
leem2209
C
Omron CP1H Motion
Hi All, I am using Omron CP1H, trying to move a motor, I am using the built in pulse output to generate pulse, the pulse output method is...
Replies
5
Views
2,945
BITS N BYTES
B
C
OMRON - CJ1M - Trio Motion controller MC206
I have a setup with a Trio Motion Coordinator MC206, Simple Servo Drive SS608 and an advanced Digital Servo Motor 523-20-F430. The project in mind...
Replies
6
Views
11,532
BobB
BobB
M
Omron plc backwards compatibility
I've come across a system running omeron cx-programmer version 9.42. Am I going to need to find a legacy version of the software to edit and...
Replies
1
Views
60
IO_Rack
IO_Rack
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
188
BobB
BobB
Back
Top Bottom