Chris Rhodan
Member
Hi ! I am trying to program a totally simple thing. I have an Omron CPM 2A 20 CDR and an Omron HMI 31C. The PLC out 10.00 is connected to an Vexta 24 Volt DC motor. I just want to program a simple start button for the motor on the terminal. Can anyone give me the correct
PT configuration (PT Control Area -> PLC Address ?) PT Notify Area -> PLC Address ?) and the right property settings for the Touch Switch I created. The switch is Momentary. Function of the button Notify Bit !
Ok I know its simple but my head is near an explosion :-(
Thanks for any HEEEEEEELP !
I use Omron NTST 3.3 !
PT configuration (PT Control Area -> PLC Address ?) PT Notify Area -> PLC Address ?) and the right property settings for the Touch Switch I created. The switch is Momentary. Function of the button Notify Bit !
Ok I know its simple but my head is near an explosion :-(
Thanks for any HEEEEEEELP !
I use Omron NTST 3.3 !