Randy Hawkins
Member
Hello, I have currently been programming Omron and some AB plc's for about 15 years but I am faced with a completely new task that scrambles my mind. I am wanting to use either a micrologix 1200 or a Omron CJ1M or CQM1 plc and program in a virtual 360 degree encoder. Im thinking it would consist of a counter set to #0360 and regulating the speed of the pulses to the counter would regulate the speed of the vurtual encoder. I am finally in the end, wanting to regulate that speed between .5-60 sec/vurtual rev. This is 1 to 120 RPM's of the vurtual encoder. Any help in doing this would be greatly appreciated. This is my first post on this site so let me know if you need any more information.
Thanks!
Randy
Thanks!
Randy