Omron sysmac cj2m cpu33

lalitnarang007

Member
L
Join Date
Jan 2015
Location
Delhi
Posts
2
Hi every1, hope all going well. I recently joined this website and this is my first post here. So actually i have a PLC OMRON make SYSMAC Model no. "CJ2M, CPU33, Ver. 2.0" I need to communicate this PLC with my Laptop & there is an Ethernet Port in the PLC so i am unable to communicate as I don't have IP address of CPU so can any1 suggest the solution for the same.

Thanks!!
Have a nice day!!
 
The factory default IP address is 192.168.250.1 if it was not changed.
You can connect with CX-P to the CJ2 using a USB cable to reset the IP address to something you can work with.
 

Similar Topics

M
Omron sysmac cj2m cpu 31 Error Code
Dear Experts, Good day:) This is the 1st time I work with Omron PLC, I have one machine operating with Omron sysmac cj2m cpu 31. The PLC has...
Replies
3
Views
4,972
mahmoud shahien
M
O
Omron NX and Sysmac (system clock)
I took an online course but don't remember covering this. How do I access the system clock in a compare instruction? I want to turn on an output...
Replies
1
Views
512
gtsuport
G
B
Omron Sysmac Import Project and adding IO Link
I come from an AB background. My current job has a lot of Omron devices. We have a couple systems with NX102's with numerous IO link devices...
Replies
0
Views
660
bagged2drag
B
M
Omron Sysmac Studio NX Place variables in structure
Hi everyone, I am trying to program a function block to copy the variables obtain from Ethercat into a structure on a NX1P2. Since I cannot...
Replies
1
Views
1,123
MITch1978
M
E
Omron Sysmac: Sort Array in HMI for selection
Hello all, I am attempting to sort a selection list via 'part-selection' buttons. Ex. a certain type of model is selected, I only want to have...
Replies
5
Views
1,368
drbitboy
drbitboy
Back
Top Bottom