Omronc200hs-connect to NEc barcode scanner

[GanShan]

CAn any one please help me .. How to use a LK201 -v unit with an C200HS Omron plc ..to receive data from a NEc barcode scanner ?
BArcode scanner is 9 pin RS232C port and LK201 -V 25 pin rs232 , where to get pin config for lk201 , and any example program ...
please help

 

[gtsuport]

Sorry, the LK201 unit will only communicate Hostlink. Only option to connect a barcode reader to this cpu would be an ASCII/BASIC module.

It might be worth thinking about upgrading the processor to a CS1. You could reuse the IO modules and the barcode scanner could connect to the RS232 port on the cpu.

Hope this will help.

 

[Jay Anthony]

If you have CPU21 or CPU31, the built-in host link port will work. This will not work with a CPU01.