Opcmatrikon with wincc

[KAZZ KAZZ]

HELLO,
it a kind straight and forward question, i have one pc, installed with pcs7 version 8.0 , i dont have any other hardware but a lan card only with an ip address i.e 192.168.1.0 , all i want to do is to monitor some tags like i want to configure matrikon opc in the same station in which my pcs7 is installed. i want to do this for the checking purpose. all of these thing would be on simulation. is there any specific manual for this or any help regarding this.

NOTE: i have no hardware. just a single pc. with pcs7 and plcsim. kindly reply asap.

 

[gclshortt]

https://support.industry.siemens.com/tf/WW/en/posts/opc-server-is-not-getting-connected/49383?page=0&pageSize=10

https://support.industry.siemens.com/tf/WW/en/posts/reading-writing-opc-in-cfc/37450?page=0&pageSize=10

OPC Matrikon Server to Wincc Client

The above threads may help you out.
Regards,