Open an UDP socket with CLX 5000

[YanSurf17]

Hi everybody,

Is there anyway to open some specifics Socket on Ethernet (192.168.1.37:21000) with Contrologix 5000 like in Siemens S7. I need to connect my PLC to a server by UDP protocol. It's working fine with Siemens but I don't find the way to do it with AB, I've just reading the Prosoft card manual but nothing interesting. Any suggestions ?

Best Regards

 

[Contr_Conn]

You must have 1756-EWEB module to do it
1756-ENBT will not do it

 

[YanSurf17]

Tank you for your help

 

[JeffKiper]

Does anyone make EWEB for the L32 or L35 family?

 

[Contr_Conn]

Not for 1769,
1768-EWEB is only for 1768-L4x compactlogix

 

[The Plc Kid]

What is meant by the OP? What is opening a UDP Socket? Where and why it is used.