NetNathan
Lifetime Supporting Member
I just recently started using Aegis shaft grounding units on my motors due to a rash bearing failures.
OT: VFD induced shaft currents. What's the solution?
- Thread starter lesmar96
- Start date
Similar Topics
Application:
I have two pumps, a 20 Hp and a 10Hp 3/ph 460v in the same conduit.
The Vfd's are located in each mcc bucket.
I have been getting...
Otis and Bubba just pulled a three year old 40 HP motor from service that has some apparent bearing problems at one particular part of its...
Hello, first of all let me state for the record that I'm not a tech of any kind, I have limited experience with industrial automation devices, so...
Sorry in advance for the long post, but this requires a little back story.
I work in a facility with a couple hundred VFDs
Most are in a web...
Customer want to use contactor for their 5HP motor blower application.
im leaning to VFD.
anyone use contractor for blower application...
