Hi all,
I have a function where I have to use Joystick to control the solenoid valve. I am using Joystick as an input to PLC(micro820 or micro850 Allen Bradley) and the solenoid valve(24VDC) at the output of PLC.
The input of joystick is 24Vdc. I am not sure what output should I consider for the Joystick.
1)0-100%
2) 4-20mA
3) 0-10Vdc
Operation:- The solenoid valve is controlling the hydraulic cylinder. The joystick is 1-way 2-position vertical up & down. (I am thinking of using - https://www.gsglobalresources.com/product/control/curtiss-wright-jc150/).
The vertical up position will open the solenoid valve and cylinder will move in forward direction.
The vertical down position will open up the solenoid valve (valve is double acting and hydraulic power unit with motor is used for the cylinder) and cylinder will move in reverse direction.
Can you please suggest me and let me know if you have any question.
Thanks.
I have a function where I have to use Joystick to control the solenoid valve. I am using Joystick as an input to PLC(micro820 or micro850 Allen Bradley) and the solenoid valve(24VDC) at the output of PLC.
The input of joystick is 24Vdc. I am not sure what output should I consider for the Joystick.
1)0-100%
2) 4-20mA
3) 0-10Vdc
Operation:- The solenoid valve is controlling the hydraulic cylinder. The joystick is 1-way 2-position vertical up & down. (I am thinking of using - https://www.gsglobalresources.com/product/control/curtiss-wright-jc150/).
The vertical up position will open the solenoid valve and cylinder will move in forward direction.
The vertical down position will open up the solenoid valve (valve is double acting and hydraulic power unit with motor is used for the cylinder) and cylinder will move in reverse direction.
Can you please suggest me and let me know if you have any question.
Thanks.