output reactor in place of input reactor ?

No, input reactors have a different output phase angle.

I would always err on the side of caution, but just anecdotally I have seen the same reactors specified by vendors for both input and output reactors. Even in AB ProposalWorks, I've had it specify two of the same reactors for PowerFlex drives.
 

Similar Topics

Hi There, I have a filler with a coriolis flowmeter that has died. the filler requires a pulsed output (manufacturer wont edit the program) is...
Replies
13
Views
270
Hey all, I am starting a new project for a customer and I am adding in solenoid valves. Once added, I noticed there was a lack of an Output...
Replies
0
Views
91
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
193
Hi, I am using AB 5069-L306ERS2 CPU. My system should achieve SIL-2. I have safety door switches connected to AB 5069-IB8S module, and I want to...
Replies
1
Views
129
Hello! Hope you are great. I need to make a change in a PLC with ladder logic. I will mount a analog valve and I need to control it in ramp up...
Replies
7
Views
355
Back
Top Bottom