Output won't work

Ya I'm new to PLC's in general and I used someone elses code and modified it to fit my need, so thats why things are sort of messy and not exactly standard, thanks again
 

Similar Topics

E
My AB 5/25 output won't come on
I added an ouput card to my PLC 5/25 and did some simple programming to get some motor starters to turn on and off. I have only installed the card...
2
Replies
16
Views
5,874
dmargineau
D
C
controllogix relay output won't energize
Hey guys, I have a 1756 OW16I series A card. I am trying to energize bit 15 to pull in a coil on a motor contactor. Our panel is configured in...
Replies
13
Views
9,894
ddutchover
D
J
Pulsed output
Hi There, I have a filler with a coriolis flowmeter that has died. the filler requires a pulsed output (manufacturer wont edit the program) is...
Replies
13
Views
181
dwoodlock
dwoodlock
S
CTEU-EP No Output
Hey all, I am starting a new project for a customer and I am adding in solenoid valves. Once added, I noticed there was a lack of an Output...
Replies
0
Views
83
Stonewall
S
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
180
Steve Bailey
Steve Bailey
Back
Top Bottom